Secure payments
Standard refund policy
Trade Assurance
| Product Type | Memory Module |
|---|---|
| Compliance Standards | RoHS |
| Memory Capacity | 4 GB |
| Memory Technology | DDR4 |
| Product Voltage | 1.2V |
| RAM Speed | 2400MHz |
| RAM Standard | DDR4-2400/PC4-19200 |
| Error Identifying | Non-ECC |
| Signal Type | Unbuffered |
| Column Access Strobe (CAS) | CL17 |
| Rank | Single Rank x16 |
| Quantity of Pins | 288-pin |
| RAM Genre | UDIMM |
This 4GB DDR4-2400 UDIMM with a non-ECC, unbuffered design is a desktop-class module purpose-built for mainstream productivity PCs, light gaming rigs, and entry-level content creation platforms. Its single-rank x16 configuration and CL17 latency deliver dependable plug-and-play stability and broad motherboard compatibility, making it an efficient, low-power upgrade for cost-sensitive builds.
1. DDR4 memory technology provides higher bandwidth and improved efficiency over previous generations, accelerating content creation workloads and reducing rendering times for video editors.
2. A modest capacity enables snappy application launches and smooth web browsing, keeping budget desktop systems responsive for everyday productivity tasks.
3. Single Rank x16 configuration reduces electrical loading on the memory controller, improving overclocking headroom and increasing stability at higher frequencies for enthusiasts.
4. 2400MHz speed delivers sufficient throughput to prevent stuttering during multi-tab workflows and casual multitasking, ensuring a fluid desktop experience.
5. CL17 latency minimizes the delay between command and data burst, sharpening system feel and giving competitive gamers quicker reaction cues in fast-paced titles.
Engineered as a desktop UDIMM with 288 pins, the Micron MTA4ATF51264AZ-2G3H1 is purpose-built to resolve the real frustrations of gamers and content creators. Its four critical characteristics translate directly into a smoother, more reliable experience when it matters most. The 2400MHz DDR4 frequency and a tightly tuned CL17 latency work in concert to slash the delay between your CPU’s request and the data delivery. In a fast-paced AAA title, this means textures pop instantly as you spin, eliminating the micro-stutter that can cost you a match; during 4K video rendering, it sustains a relentless pipeline of frame data, shaving minutes off your project timeline. The 1.2V ultra-low voltage is not merely an efficiency badge—it directly reduces thermal output, preventing your system from throttling under sustained rendering loads and allowing a quieter, more stable gaming marathon. Furthermore, the unbuffered, Non-ECC architecture strips away the signal buffer delay found in server hardware, granting your desktop’s memory controller the direct, lowest-latency path to your applications. This raw access ensures every command is executed with instant precision, delivering the fluid, hiccup-free workflow and immersive gameplay that off-the-shelf specifications alone can never guarantee.
Based on the specifications—Non-ECC, Unbuffered, 288-pin UDIMM, DDR4-2400, 1.2V—this is a standard desktop memory module. Each stick provides 4 GB capacity with a single-rank x16 configuration and CL17 latency. Below is capacity planning guidance using these modules for typical desktop workloads.
Gaming Build
A dual-channel configuration significantly boosts frame-time consistency. For a 16 GB sweet spot, populate four of these 4 GB modules across two matched pairs, ensuring they occupy the correct slots for dual-channel operation. If targeting 32 GB, four modules cannot deliver it—upgrade to higher-density kits is required since eight of these won't fit on mainstream motherboards.
Content Creation
Video editing and 3D rendering thrive on large memory pools (64 GB recommended). Building such capacity with 4 GB sticks is impractical—it would demand 16 modules. Instead, use two of these modules for a basic 8 GB scratch disk cache or as temporary placeholders, then migrate to 32 GB or 64 GB kits for serious production work.
General Productivity
For office tasks, web browsing, and multitasking, deploy two modules (8 GB total) in dual-channel mode. This delivers the best cost-efficiency while leaving two slots free for future expansion. A single 4 GB stick is acceptable for ultra-light usage but limits responsiveness under moderate multitasking.
Rigorously tested, this 4GB DDR4 UDIMM is compatible with desktops like Dell OptiPlex 7050, HP EliteDesk 800 G3, Lenovo ThinkCentre M710.
Q: Can I mix this MTA4ATF51264AZ-2G3H1 with other memory modules of different brands or speeds?
A: Mixing is not recommended, as differing timings, voltages, or ranks may cause instability. If mixed, the system will default to the slowest module's speed, potentially compromising performance and reliability.
Q: Is this memory compatible with my system? I have an Intel 200-series chipset motherboard.
A: Yes, this 288-pin DDR4 UDIMM is compatible with desktop motherboards using Intel 200-series chipsets. It operates at the standard 1.2V and 2400MHz, aligning with the platform's specifications.
Q: What is the recommended DIMM population order for optimal performance?
A: To enable dual-channel mode, populate identical modules in the same-colored slots first, typically banks A2 and B2. Consult your motherboard manual for the exact configuration to maximize bandwidth.
Q: Does this module support overclocking or XMP profiles?
A: No. This is a JEDEC-standard DDR4-2400 module without XMP. It runs at the default 2400MHz with CL17 timings for guaranteed stability and does not support enthusiast overclocking.
Q: What warranty and typical failure rate can I expect?
A: This module is backed by a 1-year warranty. As an industry-standard JEDEC-compliant product, its annualized failure rate is extremely low, typically well below 0.5% under normal operating conditions.