General

Brand	Micron
Model	RealSSD P300
Capacity	50GB
Usage Class	Enterprise

Interface

Host Interface	SATA 6Gb/s
Total Interface Bandwidth	6 Gb/s

Physical Dimension

Form Factor	2.5" 7mm

Flash & Endurance

NAND Flash	SLC
Drive Writes Per Day
Total Bytes Written	TBW

Performance

Sequential Read	360 MB/s
Sequential Write	275 MB/s
Random Read IOPS	44000
Random Write IOPS	45000
Average Latency	μs

Reliability

Mean Time Between Failures	2 Million Hours
Uncorrectable Bit Error Rate	1.0×10⁻¹⁷
Power Loss Protection	Yes

Engineer's Note

The Micron RealSSD P300 50GB (MTFDDAC050SAL-1N1AA) is best suited for write-intensive boot, logging, and industrial control workloads where SLC NAND, 44K/45K random IOPS, and steady 360/275 MB/s throughput deliver lower latency variation and higher endurance than mainstream MLC/TLC SATA drives. For architects prioritizing deterministic performance over raw capacity, this model’s SATA 6Gb/s interface and enterprise-grade SLC design make it a stronger choice than same-class capacity SSDs in cache, metadata, and embedded edge deployments.

Endurance & Reliability

With an endurance rating of [tbw] TBW and [dwpd] DWPD, the MTFDDAC050SAL-1N1AA is designed to comfortably handle typical enterprise and embedded system workloads over a long service life. In practical terms, for applications such as OS boot drives, industrial controllers, or read-intensive system storage, this level of endurance provides dependable day-to-day operation and can support many years of use without endurance-related concern when deployed within its intended workload profile. For reliability, this SSD includes power-loss protection (PLP), which helps preserve in-flight data and prevents corruption of critical mapping information if power is interrupted unexpectedly. Its UBER rating of 1.0E-16, together with a 2 million hour MTBF, reflects enterprise-class data integrity and long-term stability, giving purchasers added confidence for mission-critical deployments.

Technical Specs & Insights

1. The SATA 6Gb/s interface, paired with 360 MB/s sequential read performance, provides stable streaming throughput for boot images, logs, and archive data in legacy enterprise platforms without requiring a PCIe infrastructure upgrade.
2. With 44,000 K IOPS in random reads, the drive can accelerate metadata lookups, VM boot storms, and small-block database access where consistent responsiveness matters more than peak bandwidth.
3. A [dwpd] DWPD endurance rating makes this SSD suitable for write-intensive enterprise workloads by sustaining predictable service life under continuous daily rewrites.
4. Built on SLC NAND, it prioritizes maximum write endurance, low error rates, and highly deterministic behavior for industrial and mission-critical storage environments.
5. A typical latency of [latency] µs helps reduce storage wait time per transaction, improving application response consistency in real-time and latency-sensitive server workloads.

Capacity Sweet

For MPN MTFDDAC050SAL-1N1AA, the closest reference points in the same family are typically 25GB as the next lower capacity and 100GB as the next higher capacity. The 50GB version sits at the sweet spot of the lineup: it offers noticeably more headroom than 25GB for OS images, logs, swap, and moderate overprovisioning, while avoiding the higher acquisition cost of 100GB when the workload does not need extra capacity. With sequential and random performance remaining broadly similar across these points, 50GB is best suited for compact but dense infrastructure, such as boot and utility storage for roughly 24 to 40 virtualization hosts or appliance nodes.

FAQ