Secure payments
Standard refund policy
Trade Assurance
| Error Identifying | Non-ECC |
|---|---|
| Signal Type | Unbuffered |
| Compliance Standards | EU RoHS,FCC |
| Product Type | Memory Module |
| Memory Capacity | 2 GB |
| Memory Technology | DDR2 |
| RAM Speed | 667 |
| RAM Standard | DDR2-667/PC2-5300 |
| Column Access Strobe (CAS) | CL5 |
| Rank | Dual Rank x8 |
| Quantity of Pins | 200-pin |
| RAM Genre | SoDIMM |
This DDR2-667 SO-DIMM is tailored for upgrading older notebooks and mobile workstations, delivering a plug-and-play 2GB capacity with a dual-rank x8 configuration that enhances memory bandwidth through rank interleaving. Its unbuffered architecture and CL5 latency provide stable, low-latency operation for everyday productivity, while the 1.8V native voltage preserves battery life in legacy portable platforms.
1. SoDIMM form factor guarantees a drop-in fit for laptop memory slots, delivering a tool-free, instant upgrade path for aging ultraportables.
2. Unbuffered signal type eliminates the overhead of register chips, reducing electrical load and conserving battery life during extended mobile use.
3. Non-ECC operation matches standard consumer laptop chipsets, ensuring plug-and-play compatibility without the added power draw of error correction.
4. Its capacity allocation supplies just enough headroom to run modern lightweight operating systems and applications, effectively banishing disk-swap stutters on older notebooks.
5. Dual Rank organization allows legacy laptop chipsets to properly address the full module density, making a high-compatibility drop-in upgrade effortless.
The M470T5669AZ0-CE6 is a 2GB DDR2-667 SoDIMM engineered for notebook upgrades, and its four attributes directly tackle real-world mobile pain points. The 200-pin SoDIMM form factor delivers a guaranteed physical fit in countless legacy thin-and-light laptops and mobile workstations, eliminating compatibility headaches. Because it is non-ECC and unbuffered, it draws less power than registered alternatives, extending battery life during prolonged off-grid sessions—whether you are filling a field survey on an oil platform or reviewing legal documents on a transatlantic flight. Its DDR2-667 speed with CL5 timing aligns natively with Core 2 Duo chipsets, allowing a business notebook to run a CRM, email, and video conference side by side without seizing up. The dual-rank x8 layout enables rank interleaving for snappier response when scrolling through engineering PDFs on a service rig or accessing inventory databases on a shop floor. This integration means users swap one module, boot up, and immediately regain fluid multitasking on equipment that would otherwise face costly early retirement.
Based on the provided specs (2GB DDR2-667 SoDIMM, Non-ECC, Unbuffered, 200-pin), this is a laptop memory module. Below is the capacity planning guidance for typical notebook scenarios.
Laptop Upgrade
For older laptops with one or two SoDIMM slots, replacing a single 1GB or 2GB module with a matched pair of these 2GB modules provides 4GB total, enabling smoother multitasking on Windows 7 or 10. If the system supports dual-channel, install two identical 2GB modules to improve integrated graphics performance.
Mobile Workstation
DDR2-based mobile workstations running CAD or data analysis benefit from maximum RAM. Populate both slots with the largest supported modules (often 2x2GB, totalling 4GB) to reduce disk swapping. If the chipset allows 4GB per slot, source 4GB DDR2 modules, but 2GB is typical for dual-rank x8 SoDIMMs.
Ultrabook Power Saving
Standard DDR2 at 1.8V isn’t low-voltage. To minimize power draw, use a single 2GB module rather than a pair, as fewer ranks reduce memory controller activity. For significant battery life gains, consider migrating to a newer ultrabook with DDR3L or LPDDR. If you must stay with this module, dual-rank x8 offers slightly better power efficiency under load than single-rank equivalents.
Rigorously tested DDR2 SODIMM, compatible with laptops such as ThinkPad T60, Latitude D630, and HP Compaq 6910p.
Q: Can I mix this M470T5669AZ0-CE6 with other memory modules of different brands or speeds?
A: Mixing is technically possible, but not recommended. Different brands, speeds, or chip densities may cause instability. For best compatibility, install identical modules or ensure matched capacity and dual‑rank configuration.
Q: Is this memory compatible with my system?
A: This 200‑pin DDR2‑667 SoDIMM fits notebooks that require PC2‑5300 memory. It supports Intel 945GM/965GM and similar platforms. Please verify your laptop’s chipset and slot type to ensure full compatibility.
Q: What is the recommended DIMM population order for optimal performance?
A: Most notebooks have two SoDIMM slots. Install a matched pair of identical modules (same capacity and dual‑rank x8) to enable dual‑channel mode, which doubles memory bandwidth and improves system responsiveness.
Q: Does this module support overclocking or XMP profiles?
A: No. This module adheres to JEDEC DDR2‑667 CL5 standards. It does not feature XMP or overclocking profiles, prioritizing rock‑solid stability and low power consumption in mobile systems.
Q: What warranty and typical failure rate can I expect?
A: It comes with a one‑year warranty. As an OEM‑grade Samsung module, the annualized failure rate is typically under 0.5%, ensuring reliable long‑term operation in compatible notebooks.