| Product Type | Memory Module |
|---|---|
| Memory Capacity | 32 GB |
| Memory Technology | DDR5 |
| Product Voltage | 1.1 V |
| RAM Speed | 5600 MHz |
| RAM Standard | DDR5-5600/PC5-44800 |
| Error Identifying | ECC |
| Signal Type | Registered |
| Rank | Dual Rank x8 |
| RAM Genre | DIMM |
This DDR5-5600 Registered DIMM with ECC is purpose-built for server platforms, delivering uncompromised data integrity for virtualization, in-memory databases, and mission-critical enterprise workloads. The combination of dual-rank x8 organization and registered signaling ensures robust signal stability and increased memory bandwidth efficiency, while ECC protection mitigates single-bit errors in high-density deployments.
1. 32GB capacity per module enables high-density memory configurations in rack servers, allowing more virtual machines to run concurrently on the same physical host without sacrificing memory headroom.
2. DDR5 technology delivers higher bank count and doubled burst length, fueling parallel data throughput for memory-intensive workloads like large-scale in-memory databases and AI inference.
3. 5600MT/s transfer rate increases overall system bandwidth, shrinking response times for latency-critical enterprise applications such as high-frequency trading or real-time transactional systems.
4. ECC protection corrects single-bit errors on the fly, shielding mission-critical datasets from silent data corruption that could cascade into costly outages or compliance failures.
5. Dual Rank x8 organization interleaves memory accesses across multiple bank groups, sustaining full channel utilization under heavy multi-tenant virtualization and maximizing delivered performance per watt.
When deploying a dense virtualization cluster or running an in‑memory database like SAP HANA, memory errors are more than a nuisance—they are a direct threat to data integrity and uptime. The M321R4GA3PB0-CWMJJ is a 32 GB DDR5‑5600 Registered DIMM with ECC, purpose‑built to eliminate that risk. Its ECC engine silently detects and corrects single‑bit flips caused by cosmic radiation or electrical noise, which in a virtualized host with dozens of VMs means no corrupted transactions and no mysterious guest crashes. The Registered (RDIMM) architecture buffers command and address signals, allowing the platform to populate all memory channels with 32 GB dual‑rank modules while maintaining rock‑stable signal integrity at 5600 MT/s. That dual‑rank x8 design interleaves access across two internal ranks, so simultaneous read and write operations from multiple VMs or a hot in‑memory dataset see noticeably lower latency and higher sustained bandwidth. For an in‑memory database holding terabytes of live records, this translates directly into faster query responses and smoother user experiences, even under peak load. In a VMware or KVM cluster, it means you can safely overcommit memory and consolidate more workloads without sacrificing reliability—ultimately reducing server sprawl and total cost of ownership. This is not just a memory module; it is the foundation for trust in every calculation your enterprise performs.
General Virtualization
Deploy these 32 GB DDR5-5600 registered DIMMs in a balanced, multi-channel configuration—typically one module per memory channel across both processor sockets. This yields a total capacity of 256 GB or 512 GB, providing ample headroom for dozens of virtual machines while ECC guards against in-memory errors that could crash multiple tenants.
In-Memory Database
For latency-sensitive workloads like Redis or SAP HANA, populate all memory channels with identical dual-rank x8 modules to maximize interleaving and bandwidth. A fully populated server can reach 1 TB or more using these 32 GB RDIMMs, keeping entire datasets in DRAM and leveraging the 1.1 V low-power operation to reduce thermal strain in dense, always-on nodes.
HPC
In high-performance computing, memory bandwidth is critical; install six or eight of these 5600 MT/s DIMMs per socket to saturate the processor’s memory controllers. The registered, dual-rank design enables large per-node capacities—often 256 GB to 512 GB—while maintaining signal integrity under full load. Pair them with fast processors and avoid mixing different ranks or speeds to prevent performance variance across parallel jobs.
Rigorously tested, this DDR5 Registered DIMM is compatible with servers like Dell PowerEdge R760, HPE ProLiant DL380 Gen11, and Lenovo ThinkSystem SR650 V3.
Q: Can I mix this M321R4GA3PB0-CWMJJ with other memory modules of different brands or speeds?
A: Mixing with other modules is not recommended. Server memory requires consistent rank, timing, and vendor for stability. Mixed kits often cause POST failures or performance degradation in mission-critical environments.
Q: Is this memory compatible with my system?
A: This DDR5-5600 ECC Registered DIMM is designed for server platforms supporting DDR5 RDIMMs, such as Intel Xeon Scalable (Sapphire Rapids) and AMD EPYC 9004/8004 series. Verify your board’s QVL for validated compatibility.
Q: What is the recommended DIMM population order for optimal performance?
A: Follow your server motherboard manual’s population guide. Typically, install identical DIMMs in groups of 8 per channel, filling white or blue slots first to enable balanced interleaving and maximum memory bandwidth.
Q: Does this module support overclocking or XMP profiles?
A: No. This is an ECC Registered DIMM built for stability, not overclocking. It adheres to JEDEC DDR5-5600 standard profiles and does not support XMP or manual overclocking on server platforms.
Q: What warranty and typical failure rate can I expect?
A: This module includes a one-year warranty. Server-grade ECC RDIMMs exhibit an Annualized Failure Rate (AFR) below 0.5% under specified conditions, ensuring reliable long-term operation when properly cooled and maintained.