Secure payments
Standard refund policy
Trade Assurance
| Product Type | Memory Module |
|---|---|
| Compliance Standards | EU RoHS,FCC |
| Memory Capacity | 2 GB |
| Memory Technology | DDR3 |
| RAM Speed | 1066MHz |
| RAM Standard | DDR3-1066/PC3-8500 |
| Error Identifying | Non-ECC |
| Signal Type | Unbuffered |
| Column Access Strobe (CAS) | CL7 |
| Rank | Dual Rank x8 |
| Quantity of Pins | 240-pin |
| RAM Genre | UDIMM |
Designed as a standard desktop UDIMM module with Non-ECC unbuffered signaling, this DDR3-1066 kit is best suited for breathing new life into older LGA 775/1156/1155 platforms used for productivity, light gaming, or general content creation. Its dual-rank x8 architecture and tight CL7 latency deliver balanced access timing and improved memory bank interleaving, maximizing responsiveness on legacy chipsets without adding electrical load penalties of registered memory.
1. With 2GB capacity, this module breathes new life into aging desktops, keeping everyday multitasking and browser-based workflows fluid without resorting to slow virtual memory.
2. DDR3 technology ensures wide compatibility with legacy desktop platforms, turning an outdated office PC into a cost-effective productivity station with a simple plug-in upgrade.
3. 1066MHz clock speed provides steady bandwidth that eliminates stutter during HD media playback and casual gaming on integrated graphics systems.
4. CL7 low latency tightens command-to-data response, delivering crisper UI interactions and more consistent frame pacing in esports titles running on entry-level rigs.
5. Dual Rank x8 organization leverages bank interleaving to increase effective memory throughput, subtly accelerating photo editing and media conversion tasks on a budget desktop.
The M378B5673FH0-CF8 is a 2 GB DDR3-1066 UDIMM purpose-built for desktop platforms, where its design directly addresses the real-world demands of gamers, content creators, and power users upgrading older systems. The unbuffered, Non-ECC architecture eliminates the register chip and error-correction overhead found in server memory, so every read and write command reaches the DRAM cells with minimal latency. This is critical in a 3A gaming session where split-second reactions matter: the module’s CL7 timing ensures the CPU waits fewer clock cycles for data, delivering steadier frame pacing and snappier input response compared to looser Cas alternatives. Its dual-rank x8 organization staggers two independent sets of memory banks on the same DIMM, enabling concurrent access across ranks that lifts effective bandwidth during heavy multitasking or video rendering workloads. When scrubbing through a 1080p timeline while encoding, that interleaving keeps the preview smooth instead of stuttering. The standard 240-pin UDIMM form factor and JEDEC-compliant DDR3-1066/PC3-8500 profile guarantee drop-in compatibility across a vast range of Intel and AMD desktop boards, making it a reliable choice for breathing new life into an ageing office PC or a budget home-theatre build without worrying about SPD mismatch or boot failures.
Gaming Build
This 2GB DDR3-1066 module is far below modern gaming requirements. For a playable experience, aim for at least 16GB using a dual‑channel kit (2×8GB) at higher speeds. Combine two identical 2GB sticks only for ultra‑budget retro gaming; 4GB total will still cause stuttering in today’s titles.
Content Creation
Video editing and 3D rendering demand large, fast memory pools. This module cannot meet 64GB recommendations; its 1066MHz speed and 2GB density cripple timelines and previews. Deploy multiple matched high‑capacity UDIMMs (e.g., 4×16GB DDR3‑1600) to avoid swap thrashing in creative suites.
General Productivity
The 2GB Unbuffered Non‑ECC DIMM suits basic office PCs running lightweight OSes. Pair two for a cost‑effective 4GB dual‑channel config that handles web browsing, documents, and email. Upgrading to 8GB (2×4GB) delivers smoother multitasking without overspending on outdated DDR3 platforms.
Rigorously tested, guaranteed compatible with Dell OptiPlex 780, HP Elite 8000, and Lenovo ThinkCentre M58 desktops.
Q: Can I mix this M378B5673FH0-CF8 with other memory modules of different brands or speeds?
A: Mixing is not recommended, as differing timings and voltage demands can cause instability. If mixed, the system will default to the slowest module's speed, potentially degrading overall performance.
Q: Is this memory compatible with my system?
A: This DDR3 UDIMM is compatible with desktop platforms using Intel 5/6 Series (e.g., H55, P55) or AMD 8/9 Series chipsets. Please verify your motherboard supports dual-rank, 2 GB modules and a 1066 MHz frequency.
Q: What is the recommended DIMM population order for optimal performance?
A: For optimal dual-channel performance, install identical modules in matching-colored slots, typically slots 1 and 3 or 2 and 4, as specified by your motherboard manual.
Q: Does this module support overclocking or XMP profiles?
A: No. This module adheres to JEDEC DDR3-1066 standards without XMP support. It is designed for stable, specification-compliant operation, not for overclocked memory profiles.
Q: What warranty and typical failure rate can I expect?
A: This module includes a one-year limited warranty. Built with high-quality Samsung components, its typical annualized failure rate is extremely low, well below 0.5% under normal operating conditions.