Secure payments
Standard refund policy
Trade Assurance
| Brand | Samsung |
|---|---|
| Model | 883 DCT |
| Capacity | 480 GB |
| Usage Class | Read Intensive |
| Host Interface | SATA 6.0 Gbps |
|---|---|
| Total Interface Bandwidth | 6 Gb/s |
| Form Factor | 2.5" |
|---|
| NAND Flash | Samsung V-NAND 3-bit TLC |
|---|---|
| Drive Writes Per Day | 1.3 |
| Total Bytes Written | 683 TBW |
| Sequential Read | 550 MB/s |
|---|---|
| Sequential Write | 520 MB/s |
| Random Read IOPS | 98000 |
| Random Write IOPS | 14000 |
| Average Latency | 120 μs |
| Mean Time Between Failures | 2 Million Hours |
|---|---|
| Uncorrectable Bit Error Rate | 1.0×10⁻¹⁷ |
| Power Loss Protection | Yes |
| MPN | MZ7KM960HAHP |
|---|
The Samsung 883 DCT MZ-7LH480NE is a strong fit for read-heavy to mixed-use data center SATA tiers, combining near interface-limit 550/520 MB/s throughput with 98,000/14,000 IOPS and 1.3 DWPD endurance in a compact 480 GB point optimized for boot, cache, and scale-out server nodes. Compared with the previous-generation MZ7KM960HAHP, it brings newer Samsung V-NAND 3-bit TLC and a more cost-efficient endurance/performance balance, giving architects a better SATA replacement path where consistent QoS, validated TBW at 683 TB, and lower $/GB matter more than raw capacity.
With an endurance rating of 683 TBW, the MZ-7LH480NE can sustain about 683 terabytes of total writes over its service life, which is ample for typical system-disk, boot-drive, and read-intensive enterprise workloads. In practical terms, if the drive writes around 100–150 GB per day, it can operate for well over 10 years before reaching its TBW limit, while its 1.3 DWPD rating also confirms strong daily write capability for a 480 GB SSD. For enterprise reliability, built-in Power Loss Protection (PLP) helps preserve in-flight data and protect metadata integrity if power is unexpectedly interrupted, reducing the risk of corruption during outages. Its UBER rating of 1.0E-17 indicates an extremely low probability of unrecoverable bit errors during reads, supporting high data integrity, while the 2 million hour MTBF further reflects a design intended for dependable continuous operation.
1. The SATA 6.0 Gbps interface, paired with 550 MB/s sequential read speed, lets the MZ-7LH480NE serve as a drop-in upgrade for enterprise arrays that need faster boot, imaging, and bulk data retrieval without changing legacy backplanes.
2. With 98,000 random-read IOPS, this drive can sustain responsive performance in virtualization clusters and database workloads where many small transactions hit storage at the same time.
3. A 1.3 DWPD endurance rating gives IT teams the write tolerance needed for mixed-use enterprise workloads, helping the SSD withstand daily logging, caching, and transactional updates over its service life.
4. Samsung V-NAND 3-bit TLC enables this model to balance capacity, power efficiency, and cost, making it well suited for scale-out data center deployments that need dependable performance at a manageable $/GB.
5. Its typical latency of 120 µs helps reduce storage wait time for applications, improving consistency in latency-sensitive environments such as OLTP systems, VDI, and real-time analytics.
For Samsung MPN MZ-7LH480NE (480 GB), the nearest lower capacity in the same series is 240 GB, and the nearest higher capacity is 960 GB. These adjacent capacities generally deliver very similar sequential read/write behavior and random IOPS within normal enterprise SSD expectations for the series. At 480 GB, this SSD sits at the sweet spot of the lineup. Compared with the 240 GB model, it gives much better headroom for OS images, logs, metadata, and steady growth without forcing early capacity upgrades. Compared with the 960 GB version, it keeps acquisition cost and fleet-wide budget under tighter control while preserving essentially the same enterprise performance profile. It is especially well suited for small to mid-size virtualization clusters, such as hosting boot and application volumes for roughly 25 to 40 light-duty virtual machines.
Q: Is MZ-7LH480NE suitable for a write-heavy database server?
A: Yes. With 1.3 DWPD, 683 TBW endurance, low 120 µs typical latency, and enterprise Samsung V-NAND TLC, MZ-7LH480NE is well suited for write-intensive database and transactional server workloads.
Q: How many full drive writes per day can it actually endure over its warranty period?
A: This SSD is rated for 1.3 full drive writes per day. For a 480 GB model, that equals about 624 GB of writes daily throughout its specified warranty period.
Q: Does it include power loss protection (PLP) and why is that critical?
A: Yes, it includes power loss protection. PLP helps preserve in-flight data and metadata during unexpected outages, reducing corruption risk and improving reliability for servers, RAID arrays, and databases.
Q: What RAID level is recommended for this SSD?
A: For most server deployments, RAID 1 or RAID 10 is recommended for stronger redundancy and performance. RAID 5 may work for capacity-focused environments, but write penalty should be considered.