Secure payments
Standard refund policy
Trade Assurance
| Product Type | Memory Module |
|---|---|
| Compliance Standards | RoHS |
| Memory Capacity | 2 GB |
| Memory Technology | DDR3 |
| RAM Speed | 1333MHz |
| RAM Standard | DDR3-1333/PC3-10600 |
| Error Identifying | Non-ECC |
| Signal Type | Unbuffered |
| Column Access Strobe (CAS) | CL9 |
| Rank | Single Rank x8 |
| Quantity of Pins | 240-pin |
| RAM Genre | UDIMM |
This is a single-rank, unbuffered DDR3-1333 desktop UDIMM ideal for legacy office PCs and basic productivity workloads, where its 2 GB capacity and CL9 latency provide adequate responsiveness for light multitasking and web browsing. The single-rank x8 organization minimizes electrical loading on the memory controller, ensuring stable operation at 1333 MHz even in systems with multiple DIMMs populated.
1. A 2GB footprint provides just enough workspace for smooth office multitasking and snappy web browsing on lightweight desktop builds.
2. Mainstream DDR3-1333 frequency keeps everyday applications responsive, balancing quick data fetches for casual gaming and HD media playback.
3. CL9 timings tighten the gap between command and retrieval, delivering perceptibly faster task switching and reduced input lag in desktop environments.
4. Single-rank x8 organization lightens the electrical load on the controller, boosting compatibility and leaving subtle headroom for stability when tuning budget systems.
5. The unbuffered UDIMM architecture eliminates buffer delays, so the CPU talks straight to memory for immediate responsiveness in interactive desktop workloads.
The Micron MT8JTF25664AZ-1G4H1 is a DDR3-1333 UDIMM built specifically for desktop platforms, and its feature set directly addresses the responsiveness and compatibility demands of power users and gamers. Its unbuffered, non-ECC architecture eliminates the additional controller cycles found in registered server memory. In real terms, this means the memory controller talks straight to the DRAM chips, keeping the CL9 latency genuinely low and giving you snappier command execution during frame-critical AAA gaming or live 3D rendering where every millisecond of input-to-display lag matters.
The 1333MHz clock speed, paired with that tight CAS 9 timing, strikes a deliberate balance between bandwidth and reaction time. For a video editor scrubbing through a 1080p timeline or a gamer running a dense open-world simulation, this translates to smoother texture streaming and fewer micro-stutters compared to slower, looser kits. A standard 240-pin UDIMM form factor and strict RoHS compliance further simplify real-world ownership. It guarantees a simple, tool-free drop into virtually any mainstream desktop motherboard from that era, ensuring a quick, safe, and reliable upgrade that gets your system back to peak fluidity without compatibility headaches.
Gaming Build
For modern gaming, a 2GB DDR3 module is insufficient alone. We recommend a dual-channel configuration using a 16GB (2x8GB) or 32GB (2x16GB) kit of DDR3-1333. This single 2GB stick can only serve as a temporary placeholder; pair it with an identical module for 4GB total to run older titles, but advise upgrading to higher-capacity matched pairs to avoid bottlenecks.
Content Creation
Video editing and 3D rendering demand large memory pools. A single 2GB UDIMM cannot meet these needs. For a capable workstation, populate all available DIMM slots with high-density modules to reach 64GB, replacing this 2GB part entirely. Using mixed capacities degrades performance, so a fresh matched kit is essential for stable, sustained throughput under heavy rendering loads.
General Productivity
For basic office tasks and web browsing, this 2GB DDR3-1333 CL9 stick provides a cost-effective starting point in older systems. Install it as a single module for light use or pair two identical 2GB sticks for 4GB dual-channel operation, which improves integrated graphics performance and multitasking responsiveness. This represents the most budget-friendly configuration for entry-level productivity.
Strictly tested, compatible with desktops like Dell OptiPlex 3010 and HP Compaq 6300 Pro.
Q: Can I mix this MT8JTF25664AZ-1G4H1M with other memory modules of different brands or speeds?
A: Mixing is physically possible, but not recommended. The system will clock all modules to the slowest speed and may experience instability. Identical specifications ensure reliable dual-channel operation.
Q: Is this memory compatible with my system? (Desktop motherboards with Intel 6/7 Series or AMD 800 Series chipsets)
A: This 240-pin DDR3 1333MHz UDIMM fits desktops with Intel H61/B75/Z77 or AMD 880G/970 chipsets. Verify your board supports non-ECC unbuffered memory and 2 GB single-rank modules.
Q: What is the recommended DIMM population order for optimal performance?
A: For dual-channel motherboards, install this single-rank module in the slot farthest from the CPU, or follow color-coded pairs. Using identical modules in both channels is ideal.
Q: Does this module support overclocking or XMP profiles?
A: No. This MT8JTF25664AZ-1G4H1M is a JEDEC-standard DDR3-1333 CL9 module without XMP support. It runs at the standard 1333 MHz speed with fixed timings.
Q: What warranty and typical failure rate can I expect?
A: It includes a 1-year warranty. Typical annualized failure rate for Micron DDR3 UDIMMs is below 0.3%, reflecting mature manufacturing and rigorous testing, ensuring dependable long-term use.