Secure payments
Standard refund policy
Trade Assurance
| Product Type | Memory Module |
|---|---|
| Compliance Standards | RoHS |
| Memory Capacity | 2 GB |
| Memory Technology | DDR2 |
| RAM Speed | 800 |
| RAM Standard | DDR2-800/PC2-6400 |
| Error Identifying | Non-ECC |
| Signal Type | Unbuffered |
| Column Access Strobe (CAS) | CL6 |
| Rank | Dual Rank x8 |
| Quantity of Pins | 200-pin |
| RAM Genre | SoDIMM |
This DDR2-800 SoDIMM is designed for notebook upgrades and mobile workstations, offering a cost-effective capacity boost to extend the usability of aging laptop platforms. Its dual-rank x8 organization and low CL6 latency improve memory access parallelism and responsiveness, while the unbuffered, non-ECC signal path ensures straightforward plug-and-play compatibility in systems where error correction is handled at the chipset or not required.
1. The SoDIMM form factor slips directly into standard laptop memory slots, enabling a quick, tool-free upgrade that even non-technical users can complete in seconds.
2. A 2GB capacity breathes new life into aging notebooks, allowing smooth multitasking with lightweight operating systems and preventing constant, slow disk swapping.
3. DDR2 technology guarantees seamless plug-and-play compatibility across a broad range of legacy mobile platforms, eliminating any need for BIOS configuration or driver updates.
4. The PC2-6400 speed grade supplies ample bandwidth for launching applications and handling multiple browser tabs, keeping everyday productivity fluid and frustration-free.
5. CL6 low latency minimizes the delay between the CPU and memory, delivering a snappy, responsive feel that makes an older laptop far more enjoyable for daily tasks.
The Micron MT16HTF25664HY-800E1 is a notebook SODIMM, instantly recognizable by its 200-pin form factor and unbuffered, non-ECC architecture. This design speaks directly to mobile users who demand a practical balance of performance and efficiency. First, the non-ECC, unbuffered signal type eliminates the additional power draw and latency of error correction and register chips. For a traveling professional working from a thin-and-light laptop, that translates directly into longer battery runtime and cooler operation under sustained workloads. Paired with that is the SODIMM form factor itself, which guarantees physical compatibility with compact notebook chassis and enables a tool-free, five-minute upgrade in the field. The DDR2-800 speed with a CAS latency of 6 then steps in to keep the system responsive. Whether you are juggling large spreadsheets and video calls on a mobile workstation or simply upgrading an aging ultraportable from 1 GB to 2 GB, the dual-rank x8 organization optimizes data flow, reducing stuttering when switching between applications. Instead of an expensive new laptop, users gain a cost-effective, RoHS-compliant memory module that restores everyday fluidity and extends the useful life of their trusted machines.
Laptop Upgrade
Given these 2GB DDR2-800 SoDIMMs, most older laptops support a maximum of 4GB (2x2GB) or rarely 8GB (2x4GB where compatible modules exist). For a straightforward capacity doubling, replace a single 2GB module with a matched pair of 2GB sticks to enable dual‑channel mode and reach 4GB. Always verify your chipset’s per‑slot limit before purchasing, as many DDR2‑era systems cannot address more than 2GB per slot.
Mobile Workstation
DDR2‑based workstations typically top out at 8GB using two 4GB SoDIMMs, a scarce density for this standard. If your system supports 4GB modules, populate both slots identically to achieve the maximum 8GB, which helps with demanding software like older CAD or design suites. Confirm BIOS updates are applied, as some mobile chipsets require a revision to fully recognize high‑density dual‑rank DRAM.
Ultrabook Power Saving
Ultrabook energy efficiency gains from low‑voltage DDR3L or LPDDR technology, not standard 1.8V DDR2. These modules will work in compatible ultra‑portables but offer no additional power‑saving features; typical idle power is fixed. To minimize power draw, populate only the required capacity—using a single 4GB module (if supported) instead of two 2GB sticks can reduce overall load, though at the expense of dual‑channel bandwidth.
Rigorously tested for compatibility. Compatible with DDR2 800MHz SO-DIMM laptops like ThinkPad T61, Latitude D630, HP 6910p.
Q: Can I mix this MT16HTF25664HY-800E1 with other memory modules of different brands or speeds?
A: Mixing is possible but not recommended. The system will default to the slowest module’s speed and may cause instability. For reliable operation, install identical DDR2-800 SO-DIMM modules with matching CAS latency and dual-rank organization.
Q: Is this memory compatible with my system?
A: This DDR2 SO-DIMM fits notebooks that support DDR2-800 at 2GB per slot. It is widely compatible with older Intel 965/PM45 or AMD RS690M platforms. Please verify your chipset’s maximum memory capacity and that your system uses 200-pin non-ECC unbuffered modules.
Q: What is the recommended DIMM population order for optimal performance?
A: For dual-channel performance, install two identical modules in your laptop’s available slots. A single module can be installed in either slot; no specific population order is mandated. Matched pairs yield symmetric bandwidth and the best stability.
Q: Does this module support overclocking or XMP profiles?
A: No. This JEDEC-compliant unbuffered module does not support overclocking or XMP profiles. It operates at fixed DDR2-800 with CL6 timings, ensuring stability in standard notebook platforms that adhere to factory voltage and timing specifications.
Q: What warranty and typical failure rate can I expect?
A: You receive a 1-year warranty. This module shows an extremely low annualized failure rate, typically under 0.1% under normal thermal and voltage conditions, reflecting rigorous RoHS-compliant manufacturing and testing for durable notebook computing.